X-68 Pistelle - valuable information to disassemble the RAM for care and maintenance

• Posted on 20 January 2025
• By C. Schlager
• 1

X-68 Pistelle - valuable information on disassembling the gun for care and maintenance

In this blog you will find specially selected youtube instructions for disassembling the X-68 to care for and maintain the Real Action Marker, because at some point it is essential to replace the O-rings, as these can become ‘brittle’ very quickly and the system becomes ‘leaky’.

In this case, a soft hissing sound can be heard, as the system is no longer tight and Co2 is escaping.
You can find the service kit with all the essential O-rings here in our shop:

https://www.darkbull.eu/en/nxwerks-service-kit-for-pistelle-x-68.html

Here is the link to the X-68 tutorials:

https://www.youtube.com/watch?v=5qOT7Ixzv08

https://www.youtube.com/watch?v=jaDo9Fjq4tg

General note on the care of the X-68: As the O-rings dry out after a while, we recommend applying one or two drops of silicone oil, for example Walther Multi Care silicone spray, to the capsule piercing pin every time a new Co2 capsule is used.

When storing the X-68, do not leave the pierced Co2 capsule in the magazine. The pressure will damage the seals. In addition, a Co2 maintenance capsule, for example an Umarex Co2 valve maintenance capsule, should be used after approx. 500 shots.